Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Construction in Torrance, CA | Mason Remodeling Co Torrance
We’re an independent KraftMaid service provider in Torrance, not a manufacturer affiliate. Our crews rebuild, reface, and install KraftMaid cabinetry in Torrance homes every week, and the thing that sets our work apart here is knowing how 1950s-70s tract construction interacts with modern cabinet hardware. When you call (424) 337-6939, you get Isaac Pruett’s team, a written price before work starts, and a 365-day guarantee on the finished job.
Why Torrance Residents Choose Us for KraftMaid Service
We’ve pulled apart and rebuilt hundreds of KraftMaid cabinet runs in Torrance’s mid-century tract homes. That gives us first-hand knowledge of their joinery, hinge specs, and finish durability under South Bay salt air. Isaac Pruett studied construction technology at Los Angeles Trade-Technical College and spent nearly two decades working through every phase of residential remodeling before leading our Torrance crews. He’s the one who reads a job site quickly and gives homeowners a straight answer before anyone picks up a tool.
See our full KraftMaid sales & service capability, then call us for a free estimate. We match original KraftMaid hardware where possible, source quality aftermarket doors when finishes are discontinued, and never start a job without a written price in your hand.
Styles & brands we work with
Common KraftMaid Construction Problems We Solve in Torrance
- Melamine edge-banding lifting on drawer fronts and door panels. Torrance homes without HVAC get damp kitchens from May through August as morning marine layer lingers. The moisture gets under the edge-banding on older KraftMaid doors, and re-gluing often fails. We usually replace the door or drawer front with a new veneer component.
- Adjustable shelf clips cracking in Vantage and Momentum base cabinets. 1960s Torrance kitchens have limited storage, so homeowners load cabinets with heavy stoneware. The plastic clips crack under the weight. We replace them with metal clips and reinforce the shelf pin holes.
- Soft-close hinges losing tension on Brexton and Passport doors. Salt air near the Torrance coast accelerates wear on the internal springs and plastic damper components. Doors start slamming shut or hanging open. We swap in Blum-compatible replacements and clean the mounting plates.
- Thermofoil delamination on slab-door cabinets. South-facing Torrance kitchens without window films or awnings get direct afternoon sun reflecting off stucco walls. That heat peels thermofoil away from the MDF core. Re-gluing doesn’t hold long-term; we recommend new doors or refacing.
- Sagging upper cabinets in original plaster walls. Many Torrance tracts have studs at 16 inches on center under plaster, with undersized headers behind the drywall. KraftMaid upper boxes weigh 15-20 pounds empty. We add blocking before re-hanging so they stay flush and level.
KraftMaid Service in Torrance: What Local Conditions Mean for Your Equipment
Torrance’s 1950s-70s tracts are some of the few South Bay neighborhoods where original interior stud cavities were framed at 16 inches on center under plaster walls. That’s a checkable fact, and it matters if you’re re-hanging KraftMaid upper cabinets in an Old Torrance ranch. Pull the old boxes down and you’ll often find undersized headers or blocking that was never there in the first place. Hang a 15-20 pound cabinet on that and it sags within a year. Our crews add blocking before re-hanging every upper cabinet, then verify the box is level across 24 inches of travel. This doesn’t happen the same way in newer South Bay builds with drywall over 24-inch stud spacing; Torrance’s plaster-era framing requires a different approach, and we’ve learned that from years of opening up these walls. On a 1962 ranch in Old Torrance, our tech found three KraftMaid Vantage uppers with soft-close hinges that had seized after years of marine-layer humidity. The homeowner wanted to keep the original door fronts, so we ordered a batch of Blum-compatible hinges, cleaned the mounting plates, and re-hung the cabinets with new screws into new blocking. The doors now close with no pop.
KraftMaid Models & Products We Service in Torrance
We work on KraftMaid Vantage, Momentum, Passport, and Brexton lines. For hinges, drawer slides, and shelf clips, we match original KraftMaid hardware where it’s still available. For thermofoil doors and delaminated panels, we recommend replacing the door or drawer front with a new veneer or paint-grade component rather than re-gluing. Discontinued finishes get matched with aftermarket doors from local millwork shops, color-sampled on site. We keep common hinge and clip sizes stocked for fast Torrance turnaround. If you’re in our broader Torrance service area, we can usually diagnose the issue in one visit.
See the difference
Before
After
Before
After
Before
AfterKraftMaid Service Pricing in Torrance
| Service | Typical Torrance Range |
|---|---|
| Cabinet Installation | $4,000 – $13,000 |
| Cabinet Refacing (custom door/drawer fronts) | $4,500 – $12,000 |
| Kitchen Island Installation | $3,000 – $10,000 |
| Full Kitchen Remodel with KraftMaid cabinets | $14,000 – $45,000 |
What drives the cost: number of boxes, finish grade, whether we’re adding blocking behind plaster walls, and how much hardware needs replacing. Your free estimate includes a written line-item price before any work starts. Call (424) 337-6939 to schedule yours.
Serving Torrance, CA - Our Local Coverage Area
We’re based in the Torrance area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – KraftMaid Construction in Torrance
We generally replace thermofoil doors rather than attempting to re-glue peeling edges, because the adhesive bond has already failed and re-gluing rarely holds in Torrance’s humid coastal air. For slab doors with delamination on multiple panels, refacing is usually the better long-term value. Call (424) 337-6939 and we’ll tell you what your specific doors need.
Yes. We keep common Blum-compatible hinge sizes and metal shelf clips in stock for fast turnaround, and we can order original KraftMaid hardware for Vantage, Momentum, Passport, and Brexton lines when it’s still manufactured. If you’re mid-project and a hinge seized, call (424) 337-6939; we’ll tell you what’s on the truck.
Yes. The 32mm system is standard for KraftMaid, and we match the original pin spacing exactly when adding roll-outs or re-setting shelves. We reinforce the existing holes where needed and never drill new patterns that would weaken the cabinet sides. A quick measurement tells us what your boxes can take.
Most refacing projects in Torrance run two to four weeks from template to install, depending on door style and finish availability. Discontinued finishes may add a week for custom color matching. We’ll give you a start date in writing before you commit. Call (424) 337-6939 for a current schedule.
Yes, in most cases. We source paint-grade or veneer doors from local millwork shops and match the existing color sample on site, in your kitchen’s actual lighting. It’s never a perfect blind match, but we get close enough that most homeowners can’t spot the difference from three feet. Call (424) 337-6939 and bring a drawer front to your estimate.
Service Areas Near Torrance
We serve the full Torrance service area plus nearby KraftMaid service in Westchester, KraftMaid service in Redondo Beach, Manhattan Beach, Wilmington, and Inglewood.
Book Your KraftMaid Service in Torrance Today
Call (424) 337-6939 to schedule a free estimate. A live person answers every call, 24/7. Isaac Pruett and our Torrance crew will show up with a written price, a photo ID badge, and a straight answer about what your cabinets actually need.
Written by Isaac Pruett, Owner at Mason Remodeling Co Torrance, serving Torrance since 2004.
