Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Jerith Kitchen Remodeling: The Torrance Owner’s Guide
Jerith kitchen remodeling in Torrance typically runs $14,000 to $45,000 installed, depending on cabinet count, countertop material, and whether walls or plumbing move. Most full-gut Jerith-style kitchen projects we take on in Torrance are completed in 3 to 6 weeks, and we carry the common Jerith-compatible cabinet hardware, hinges, and drawer slides on the truck so a failed part doesn’t stall the whole job. Homeowners usually find their way to us after a drawer front sags, a soft-close hinge stops catching, or a cabinet box pulls away from the wall near the Del Amo Fashion Center corridor and they realize the original install used builder-grade components that simply wore out.
Isaac Pruett has seen enough Jerith-era kitchens in Torrance to know which components fail first and why. The good news: most of it is fixable without scrapping the whole kitchen.
Which Jerith Models This Applies To
Jerith built aluminum and vinyl fencing primarily, but the name also shows up on mid-2000s through early-2010s residential kitchen packages installed throughout Torrance tract homes. The kitchen lines were not serialized the way the fencing was, so identification usually comes down to hinge stampings, drawer-slide profiles, and cabinet box construction. If you’re not sure what you have, we can identify it on site: European-style cup hinges with a 35mm bore are the most common Jerith-spec cabinet hardware, and they’re interchangeable with Blum, Grass, and Salice equivalents.
The compatibility gotcha we see most in Torrance: Jerith cabinets from that era often used a 5/8″ box side with a 1/2″ back panel, which is thinner than today’s 3/4″ standard. Aftermarket drawer slides that assume 3/4″ material won’t mount cleanly without shims. We keep both face-frame and frameless hardware on hand, so the right fix doesn’t turn into a week of waiting for parts.
An OEM Jerith part is worth using when it’s a visible piece, like a matching door or drawer front profile. For functional hardware that nobody sees, quality aftermarket from Blum or Accuride usually outlasts the original and costs less. We’ll tell you which makes sense for your job before any work is scheduled.
Styles & brands we work with
Signs Your Jerith Kitchen Remodeling Is Failing
- Sagging drawer fronts with a visible gap at the top. The original Jerith-era undermount slides wear at the ball-bearing races, and once one side drops, the drawer twists and the front gaps. Replacing the pair of slides fixes it; tightening screws only buys a few weeks.
- Soft-close hinges that no longer catch. The hydraulic damper inside the hinge cup dries out after 8 to 12 years in Torrance’s dry inland air. The hinge still works, but the soft-close feature is gone, and it’s usually a hinge swap, not an adjustment.
- Cabinet doors that won’t stay aligned no matter how you adjust them. This is often the hinge plate screws stripping out of the 5/8″ box side. The fix is a threaded insert or a replacement hinge plate with a wider footprint, not another turn of the screwdriver.
- A cabinet box pulling away from the wall or dropping at the corner. Jerith-installed kitchens from that period sometimes used short screws into drywall anchors instead of studs. In Torrance, minor seismic movement finishes the job. We re-anchor into studs and add a French cleat where needed.
- Lazy Susan or corner hardware that grinds or sticks. The nylon bushings in these units flatten over time, and replacement bushings are cheap and available. If the pole itself is bent, the whole assembly gets swapped.
Replacement Cost & What’s Included
For a targeted Jerith parts replacement in Torrance, expect $150 to $600 per affected cabinet, which covers the part, labor, and a written line-item price before work starts. If you’re replacing all hardware across a full kitchen, that falls in the $800 to $2,500 range. A full Jerith kitchen remodel starts at $14,000 and runs to $45,000 for larger Torrance kitchens with new cabinetry, countertops, and layout changes.
Here’s the breakdown, Torrance pricing:
| Job | Typical Installed Range |
|---|---|
| Kitchen Remodel (full) | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Cabinet Installation | $4,000 – $13,000 |
| Countertop Installation | $2,000 – $6,500 |
| Backsplash Installation | $800 – $2,500 |
| Kitchen Island Installation | $3,000 – $10,000 |
Every quote is written before any work starts, with no change orders unless you ask for something new. The work is covered by our 365-Day Done Right Promise: if something isn’t right within a year of completion, we fix it at no cost.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Some of this is genuinely doable for a handy Torrance homeowner. Adjusting hinge screws, replacing a drawer front, or swapping a soft-close hinge takes basic tools and patience. What’s tougher is diagnosing a structural issue: if a cabinet box is separating from the wall or a corner cabinet has dropped, the fix involves re-anchoring into studs, shimming, and sometimes removing the countertop to relieve load. That’s the point where most people call us.
Cabinet work itself isn’t dangerous like electrical or a garage-door spring, so if you want to try the small stuff first, we’ll never talk you out of it. But if a drawer slide breaks mid-mount and a loaded drawer drops on a foot, that’s a trip to urgent care you didn’t need. You should know what’s happening in your home before anyone starts work, and that includes you. Call (424) 337-6939 and we’ll help you sort DIY from call-a-pro over the phone, free.
FAQs
Original Jerith-era hinges and slides typically last 8 to 12 years in Torrance’s climate before the soft-close dampers dry out and the slides develop play. Cabinet boxes themselves can last 20 to 30 years if they were mounted to studs correctly, which is why we re-anchor and rebuild rather than replace when the boxes are sound. Call (424) 337-6939 and we’ll assess what’s worth saving and what’s not.
No, worn ball-bearing slides can’t be rebuilt, and lubricating them just spreads dried grease around. Replacement slides are inexpensive and install in under an hour per drawer. If you’re seeing the same two drawers fail repeatedly in a Torrance kitchen, the mounting surface is usually the real problem, and that’s a fix we make permanent.
Most single-cabinet repairs take under two hours, and a full kitchen hardware replacement is typically a one-day job. Structural re-anchoring of cabinet boxes can add a second day if we need to remove and reset countertop sections. We’ll give you a schedule in writing before work starts.
We stock the common Jerith-compatible hinges, drawer slides, cabinet hardware, and mounting systems on the truck for most Torrance jobs. Specialty pieces, like matching door profiles, get ordered in, usually within a few business days. We also install parts from KraftMaid, Cambria, and Silestone systems when the project calls for it. Call (424) 337-6939 to confirm we have what your kitchen needs before you drive all over town.
Contact Mason Remodeling Co Torrance
If your Jerith kitchen is showing its age, get a straight answer on what it’ll take to fix it. Call (424) 337-6939 and a live person answers, 24/7. We’ll schedule a visit, give you a written price before any work begins, and you’ll know exactly who’s coming to your door, their name and photo included, before they arrive.
Written by Isaac Pruett, Owner, Mason Remodeling Co Torrance at Mason Remodeling Co Torrance, serving Torrance and nearby areas.
