A Mason company - serving Torrance, CA
An open living room and dining area after a whole-home remodel

Barrette Roofing Nationwide

Free Estimate on SiteCalls Answered by a Live Person, 24/7Background-Checked TechniciansA Local Team in Torrance
A remodeled primary suite with built-in wardrobes and a window seat
A remodeled staircase with wood treads and a slim metal railing
A finished basement family room with a media wall and wet bar
A remodeled laundry and mudroom with a bench, cubbies and painted cabinets
A built-in window seat in a bay window
A garage converted into a guest room and home office
New painted shaker cabinets with an organized deep drawer
A remodeled hall bathroom with patterned floor tile and painted walls
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

Your dream remodel for as low as$199/month*On approved credit; ask for current terms
Get your free estimate

Barrette Roofing: The Torrance Owner’s Guide

If your Barrette roof is leaking, flashing has pulled loose, or a section of shingle has torn away in a Santa Ana wind, we can source the correct Barrette-compatible material and install it. Typical repair work on a Barrette roof in Torrance runs $400 – $1,800, with full replacement between $8,000 and $20,000 depending on size, pitch, and tear-off needs. Most owners call us after spotting a water stain on the ceiling or finding granules collecting in the gutter, and usually what failed is a small thing: a cracked boot, a lifted corner, a corroded nail. The good news is these are fixable fast, and we stock many of the common Barrette-profile parts on the truck so you aren’t waiting weeks for a match.

Call (424) 337-6939

We’re an independent service provider in Torrance, not a Barrette dealer or affiliated with the manufacturer. That means our job is to tell you honestly whether your existing roof can be repaired and what it will cost, without pushing a brand or an upsell. Isaac Pruett has been reading roofs in this part of Los Angeles County long enough to know that coastal air behaves differently than inland heat, and Barrette products hold up better when the details are done right the first time.

Which Barrette Models This Applies To

An open living space after a whole-home remodel

Barrette manufactures a wide range of roofing profiles across their asphalt shingle lines, and the part you need depends on the exact profile and color code. If you still have the original packaging or an invoice, look for the series name and the color code stamped on the wrapper, because two profiles can look nearly identical from the ground and not interlock correctly if mixed. Barrette’s dimensional shingle profiles have different exposure heights than their three-tab equivalents, and matching the exposure is the difference between a patch that lasts twenty years and one that collects water after two.

When the original Barrette part is discontinued or on backorder, we source quality aftermarket equivalents that meet or exceed the same wind and impact ratings. In most cases, a dimensional shingle from GAF, CertainTeed, or Owens Corning in a matching color blend will lay down cleanly alongside existing Barrette shingles if the exposure and thickness match. For anything load-bearing like underlayment or flashing, we insist on specification-grade material. The compatibility gotcha we see most in Torrance: Barrette’s lighter color blends fade differently than some aftermarket equivalents under direct coastal sun, so we carry physical color samples to match against the installed roof rather than trusting a catalog photo. You should know what’s happening in your home before anyone starts work – that’s just the job.

Explore

Styles & brands we work with

Kitchen remodeling
Kitchen remodeling
Bathroom remodeling
Bathroom remodeling
Home additions & ADU
Home additions & ADU
Roofing
Roofing
Windows & doors
Windows & doors
Driveway & pavers
Driveway & pavers
Fence
Fence

Signs Your Barrette Roofing Is Failing

  • Granules in the gutter or downspout. Asphalt shingles shed granules as they age, and if you’re seeing a fine black or gray grit collecting after every rain, the protective surface is wearing thin. On Barrette roofs in Torrance, this often shows up first on the south-facing slope, which takes the most sun.
  • Curling or lifted shingle corners. Heat and wind work edges loose over time, and a lifted corner becomes a wind catch. One lifted shingle on a Torrance rooftop can peel away a whole course during a sustained Santa Ana event, which is why we treat this as a priority repair, not a cosmetic one.
  • Water staining on ceilings or walls. By the time a leak shows up inside, the water has already traveled through the roof deck, and the actual entry point is rarely directly above the stain. We trace the path from the stain upward and look at flashings, penetrations, and seam lines where Barrette shingles meet vents or pipes.
  • Cracked or corroded pipe boot flashing. The rubber boot around vent pipes dries out and splits after years of sun exposure, and on the coast, salt air can accelerate that. This is one of the most common Barrette repair calls we get in Torrance, and it’s typically a same-visit fix because we stock boots in the common pipe sizes.
  • Sagging or soft spots underfoot. If you can feel a soft spot when walking the roof, the decking beneath the Barrette shingles has absorbed moisture and begun to deteriorate. This is the kind of repair where the shingle is only the surface problem, and the sheathing underneath has to be addressed before anything else goes back on.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Replacement Cost & What’s Included

A remodeled living room with built-in shelves around the fireplace

Roof repair in Torrance for a Barrette roof typically lands between $400 and $1,800. At the low end, you’re looking at a single pipe boot replacement, a small shingle patch, or re-sealing a flashing seam. At the higher end, you’re often dealing with multiple damaged courses, rotted decking sections, or a valley re-flash. Full roof replacement runs $8,000 – $20,000, and the spread comes down to roof size, pitch (steeper roofs mean slower, more careful work), number of existing layers to tear off, and whether the decking is sound underneath.

Every price we give includes the Barrette-compatible material, all labor, haul-away of the old material, and a written breakdown so you see parts and labor separately. We provide a written price before any work starts, every time, with no change orders snuck in mid-job. The workmanship is covered by our 365-Day Done Right Promise: if the repair isn’t right within a year of completion, we come back and make it right at no cost. That’s 365 days from the date we finish, stated plainly, not buried in fine print.

DIY or Call Us?

Some things are safe to check yourself. You can clear leaves from the gutters, look for obvious lifted shingle edges from the ground with binoculars, and check your attic for daylight coming through the decking. Those observations help our crew know what to expect before they arrive. What you shouldn’t do is climb a ladder and start pulling up Barrette shingles. Walking a roof without the right shoes and training is how people end up in urgent care, especially on a two-story Torrance home where the fall is unforgiving. Removing shingles without knowing how the underlayment is sealed or how the courses interlock can turn a $400 patching job into a $2,500 water-damage repair.

If you’ve got a leak, a lifted course, or a suspicion that something isn’t right up top, call us at (424) 337-6939. A live person answers, day or night, and we’ll help you figure out whether you need a repair visit or just a watchful eye for another season.

FAQs

A whole-home remodel with the living, dining and kitchen areas opened up

Getting started with Mason in Torrance

Every project starts with a conversation and a written price. Here is how to take the first step.

A project lead measuring a kitchen with the homeowner during a free estimate

Free on-site estimate

A project lead walks the job with you, measures it and hands you a written, line-item price. No obligation.

Book an estimate
A remodeling crew arriving at a home with lumber and tools

Your Torrance team

A local crew that works across Torrance and the towns around it, to the same written standard as every Mason location.

Areas we serve
A worker laying floor protection and a dust barrier before work starts

Read our written promise

What we promise on every job, written down, with the terms spelled out before any work starts.

Our promise
Need Construction help in Torrance? Licensed & insured · Free written quotes response · free estimates
Call (424) 337-6939
Local Service Coverage

Request a Free Estimate in Torrance

Tell us what you need - Mason Remodeling Co Torrance responds fast. No obligation.

By requesting your free estimate, you acknowledge our Privacy Policy and agree to be contacted by call, text, or email regarding your service needs, including from the affiliated professionals who may take on the job.

Prefer to text? Text Now
Call Now - 24/7 Dispatch