Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Torrance Owner’s Guide
KraftMaid bathroom remodeling in Torrance typically runs between $9,000 and $28,000 installed, with the final number driven by vanity size, countertop material, tile scope, and whether you’re moving plumbing. We complete most KraftMaid bathroom remodels in 2 to 4 weeks once materials are on site. Most Torrance homeowners call us after living with a failing part for months: a vanity drawer that won’t close straight, a cabinet door hinge that’s stripped out, water damage spreading under the sink base, or a medicine cabinet that’s pulling away from the wall. By the time you’re reading this, you’ve probably already done the temporary fix twice and you’re ready for the real one.
Which KraftMaid Models This Applies To
We work on virtually every KraftMaid cabinet line installed in Torrance homes over the last 25 years, including the mainstream veneer lines, the plywood-box upgrade series, and the full-custom configurations ordered through big-box retailers. The quickest way to identify what you have: open a drawer and look for the KraftMaid stamp on the inside of the drawer box or the hinge plate. Most KraftMaid cabinets made after 2015 carry a small sticker or laser marking on the left interior wall with the SKU and finish code. If the sticker is gone, measure the drawer opening width: KraftMaid run sizes (9″, 12″, 15″, 18″, 21″, 24″) are a reliable fingerprint.
One compatibility gotcha we see on older Torrance installs: KraftMaid switched hinge bore patterns on some door lines around 2018. A door from a 2016 cabinet will not always hang on a 2020 frame without a hinge plate adapter. We stock those adapters on the truck, and we will not drill new bore holes in an old door unless you want it done that way. On the OEM versus aftermarket question: for structural parts like drawer boxes, corner braces, and toe-kick clips, original KraftMaid components fit best and we will order them directly. For hardware like soft-close dampers, hinges, and glides, we often recommend Blum or Salice equivalents that exceed the OEM spec and come with longer wear ratings. We will tell you which is which before any purchase is made. It bears saying plainly: Mason Remodeling Co Torrance is an independent remodeling contractor. We are not affiliated with KraftMaid, and we do not sell parts as a dealer. We install, repair, and replace, and we are honest about where every part comes from.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Soft-close doors slamming shut or not closing at all. The damper inside the hinge has worn out or the hinge spring has fatigued. This is the single most common service call we get in Torrance, especially in guest bathrooms that get used hard during the holidays.
- Drawer glides grinding or catching. The ball-bearing slides have collected dust, hair product residue, or humidity swelling. Once the nylon bearing cage cracks, the drawer will never glide smooth again.
- Water staining or swelling at the vanity toe kick or under the sink. This is not a cabinet problem yet, it is a sign the sink flange or trap is leaking and the particleboard box is absorbing it. Torrance hard water mineral buildup makes these leaks worse over time and hides them longer.
- Doors hanging crooked or rubbing the frame. Hinge screws have pulled out of the particleboard or the hinge plate itself has bent. Tightening the screw usually just spins it now.
- Melamine peeling at drawer edges or shelf fronts. Once the edge banding separates, moisture gets into the substrate and the panel will swell within months. This is a replacement item, not a repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full KraftMaid bathroom remodel in Torrance lands between $9,000 on the compact side of a 5×8 guest bath and $28,000 for a full master bath with custom vanity configuration, tile surround, and glass enclosure. The single biggest swing factor is whether you keep the existing plumbing locations or move them; moving a toilet or shower drain line can add $1,500 to $3,500 alone depending on slab versus raised foundation. Here is the line-item picture we use in Torrance:
- Vanity installation: $800 – $3,000 depending on width and whether it’s a stock box or a semi-custom assembly.
- Countertop install: $2,000 – $6,500 for quartz or solid surface from Cambria or Silestone, including sink cutout.
- Walk-in shower installation: $4,500 – $12,000 with tile, pan, and Kohler or Moen trim.
- Tub-to-shower conversion: $3,500 – $10,000 including demo and waterproofing, which we do to code, not to a shortcut.
Every quote is a written line-item price before work begins. No change orders unless you ask for a change. We include material, labor, cleanup, haul-away, and a written scope of work. The workmanship is covered under our 365-Day Done Right Promise: anything we installed that fails within a year gets fixed at no cost to you. If a part itself fails, we handle the warranty claim and the labor to swap it is covered if the part was supplied by us.
DIY or Call Us?
There are a few things worth checking yourself before you call. Confirm the cabinet is actually anchored to the wall studs, not just sitting on the old fasteners. Check whether the drawer glides are bent or just clogged. Look at the hinge screws: if they spin freely, the particleboard has stripped. Those are diagnostic steps, and most Torrance homeowners do them before calling. The repair itself is where DIY goes wrong. Bathroom cabinet boxes absorb moisture differently than kitchen boxes, and a swollen vanity can hide a slow leak that needs a plumber’s eye, not a handyman’s caulk line. If you are dealing with a medicine cabinet wired into an outlet, leave the electrical until we get there. You should know what’s happening in your home before anyone starts work, that’s just the job. Call (424) 337-6939 and we’ll walk through what you’re seeing and give you a straight read before we schedule anything.
FAQs
KraftMaid bathroom cabinets in Torrance typically last 15 to 25 years, but the finish and hardware start showing wear around the 10-year mark, especially in homes without bathroom exhaust fans. Torrance’s marine-layer humidity accelerates edge-band wear on melamine and vinyl-wrapped doors compared to inland cities like Riverside or Ontario. We see finish failure and hinge fatigue years earlier in bathrooms that run a shower without a working exhaust fan.
Yes, in about 70% of cases we can repair a single failed part, a hinge, glide, drawer box, or face frame, without replacing the entire vanity. The honest exception is water-damaged particleboard: once the box swells, it is structurally compromised and no repair will hold long term. If you can push a screwdriver into the cabinet wall and it feels soft, that box gets replaced. Call (424) 337-6939 for a straight answer on your specific cabinet.
A typical KraftMaid bathroom remodel in Torrance takes 2 to 4 weeks from demolition to the final walk-through, depending on whether plumbing moves, tile complexity, and any custom cabinet lead time. Custom and semi-custom KraftMaid orders can take 4 to 8 weeks to arrive before any installation begins. We give you a written schedule with the price, so you know what happens and when.
We stock the most common KraftMaid-compatible hardware on the truck, including soft-close hinge dampers, drawer glides, corner braces, and Euro-style hinge plates, for most projects in Torrance. Structural parts specific to your cabinet line, like drawer boxes and doors, are ordered from the manufacturer or our local supplier and typically arrive inside a week. If we have it on the truck, we’ll install it that visit. Call (424) 337-6939 and we’ll tell you exactly what we can do today.
Written by Isaac Pruett, Owner, Mason Remodeling Co Torrance at Mason Remodeling Co Torrance, serving Torrance and nearby areas.
